Herringbone Double Hat

When you purchase through links on my site, I may earn an affiliate commission.
Here’s how it works.

Make this cozy and pretty Herringbone Double Hat with just one ball of Chunky Weight Yarn [5]. The top-down hat is crocheted in one piece from start to finish and available in sizes from baby to adult large. For a complete look, there is also a matching scarf pattern available. Get the free pattern in my post below, or pick up an ad-free copy from my shop.

Get last week’s Herringbone Half Double Scarf pattern for free here:
Herringbone Double Scarf

---

Crochet a Cozy Herringbone Double Hat

Create your project page on Ravelry here.

PIN now, to make later ↓

---

Disclaimer: The yarn used for this project was given to me by King Cole Yarns. If you’d like to try their yarns you can find your local King Cole Yarn Stockist here. Find all my free crochet patterns designed using King Cole Yarn here.

Supplies

• Yarn: King Cole Ultra Soft Chunky. (check your local yarn shop here). 3.52 oz (100 g) and 158 yds (145 m). 100% Premium Acrylic. Bulky Weight Yarn [5]. Machine wash gentle at 40°C. Tumble dry low heat. Do not iron. Do not bleach. Dry clean any solvent.
• Color: 1 skein Fern (Shade: 4637)
• Crochet Hook: 6 mm (J) for the main hat and 5 mm (H) for the hat band
• Finished Project: Adult Small (Teen) Hat:  2.25 oz (64 g) and  101 yds (93 m)
• Scissors, Tapestry Needle (yarn needle)

Difficulty Level

• Easy-Intermediate

Finished Sizes

These hats will stretch approximately 2-3 inches in circumference. Two hat heights have been included: base of earlobe, (slouch).

• Preemie: Approximately 9.5″ circumference and 4.5” (5″) height.
• Newborn: Approximately 11.5″ circumference and 5” (5.5″) height.
• 0-3 months: Approximately 13.5” circumference and 6” (6.25”) height
• 3-6 months: Approximately 14.5″ circumference and 6.25” (6.75”) height.
• 6-12 months: Approximately 15.5″ circumference and 6.75” (7.25″) height.
• 12-24 months: Approximately 16″ circumference and 7” (7.5″ height).
• 3-5 years: Approximately 17″ circumference and 7.5” (8″) height.
• 6-10 years: Approximately 18″ circumference and 8”, (9″) height.
• Teen: Approximately 19″ circumference and 8.25” (10″) height.
• Adult medium: Approximately 20″ circumference and 8.75” (11″) height.
• Adult large: Approximately 21″ circumference and 9.5” (12″) height.

Gauge

• approximately 10 hbdc per 4 inches and 8 rows in 4 inches (hat)
• Approximately 8 sc in 2 inches and 6 rows in 2 inches (hat band)

You can substitute any yarn and hook for this stitch pattern – just remember when you substitute if your gauge is different, the finished size of your project will also be different.

Abbreviations

US Terminology used

• BL – back loop
• ch – chain
• DMR – double magic ring
• g – grams
• hbdc – herringbone double crochet
• m – meters
• oz – ounces
• R – row
• RS – right side
• rem – remaining
• rep – repeat
• Rnd – round
• sc – single crochet
• sk – skip
• sl st – slip stitch
• st/sts – stitch/stitches
• yds – yds
• * – Repeat the instructions between the asterisks the number of times indicated. This repeat will contain multiple instructions.
• () – Repeat the instructions between the parentheses the number of times indicated.
• [] – at the end of the row – the total number of stitches

Special Stitches

Herringbone Double Crochet Stitch (hbdc)

Yarn over hook, insert hook into next stitch, yarn over and pull up 1 loop and pull that same loop through the first loop on your hook. Yarn over and pull through the next loop on your hook. Yarn over and pull through the remaining 2 loops on your hook.

Video Tutorial for the Herringbone Double Crochet Stitch
Photo Tutorial for the Herringbone Double Crochet Stitch

Tutorials

• Crochet Dictionary
• Double Magic Ring (DMR)
• Herringbone Double Crochet Stitch

Notes

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch
• this project is worked in joined, turned rounds
• Do not count the sl st as a stitch (unless indicated)
• The initial ch 3 counts as 1 hbdc stitch
• The initial ch 1 does not count as a stitch
• the first st of each round is worked in the same st as you sl st to join
• You don’t have to use a magic ring (DMR), learn more here.
• Small sizes have a hat band height measuring approximately 1.25 inches, and larger sizes have a hat band height measuring approximately 2.5 inches.
• Two hat height options are included in each pattern size. They are listed as: base of earlobe (slouch hat). The earlobe number will give you a hat that reaches the base of earlobe, the (slouch hat) rows will give you a longer slouch hat with a band you can turn up.
• TURNING INSTRUCTIONS: If your hat finishes on an even numbered round, be sure to TURN your hat so the Right Side (RS) is facing before you begin the hat band.
• Add the Herringbone

Herringbone Half Double Hat

This hat is crocheted from the crown to the brim
in joined rounds, in one piece. The hat band is added to the main hat.

Preemie Herringbone Half Double Hat

To fit 12″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in each of the next 4 sts**. Work from * to ** around, sl st to the first st to join, turn. [24 hbdc]

Rnd 4-Rnd 6(7): 1 hbdc in each st around, sl st to the first st to join, turn. [24 hbdc]

Rnd 7 (8): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [24 hbdc]

Do not finish off. Proceed to the Hat Band Sizes Preemie to 6-12 months section below.

Newborn Herringbone Half Double Hat

To fit 14″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** 8 times. 1 hbdc in each rem st around, sl st to the first st to join, turn. [28 hbdc]

Rnd 4-Rnd 7(8): 1 hbdc in each st around, sl st to the first st to join, turn. [28 hbdc]

Rnd 8 (9): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [28 hbdc]

Do not finish off. Proceed to the Hat Band Sizes Preemie to 6-12 months section below.

0-3 months Herringbone Half Double Hat

To fit 16″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 6 sts**. Work from * to ** 4 times. 1 hbdc in each rem st around, sl st to the first st to join, turn. [34 hbdc]

Rnd 5-Rnd 8(9): 1 hbdc in each st around, sl st to the first st to join, turn. [34 hbdc]

Rnd 9(10): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [34 hbdc]

Do not finish off. Proceed to the Hat Band Sizes Preemie to 6-12 months section below.

3-6 months Herringbone Half Double Hat

To fit 17″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 4 sts**. Work from * to ** around. Sl st to the first st to join, turn. [36 hbdc]

Rnd 5-Rnd 9(10): 1 hbdc in each st around, sl st to the first st to join, ch 1, turn. [36 hbdc]

Rnd 10(11): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [36 hbdc]

Do not finish off. Proceed to the Hat Band Sizes Preemie to 6-12 months section below.

6 – 12 months Herringbone Half Double Hat

To fit 18″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 2 sts**. Work from * to ** 8 times. 1hbdc in each rem st around, sl st to the first st to join, turn. [38 hbdc]

Rnd 5-Rnd 10(11): 1 hbdc in each st around, sl st to the first st to join, ch 1, turn. [38 hbdc]

Rnd 11(12): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [38 hbdc]

Do not finish off. Proceed to the Hat Band Sizes Preemie to 6-12 months section below.

12-24 months Herringbone Half Double Hat

To fit 19″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 2 sts**. Work from * to ** around. Sl st to the first st to join, turn. [40 hbdc]

Rnd 5-Rnd 8(9): 1 hbdc in each st around, sl st to the first st to join, ch 1, turn. [40 hbdc]

Rnd 9(10): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [40 hbdc]

Do not finish off. Proceed to the Hat Band Sizes 12-24 months to Adult Large section below.

Toddler (3-5 years) Herringbone Half Double Hat

To fit 20″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 2 sts**. Work from * to ** around. Sl st to the first st to join, turn. [40 hbdc]

Rnd 5: *2 hbdc in the next st, 1 hbdc in each of the next 19 sts**. Work from * to ** around. Sl st to the first st to join, turn. [42 hbdc]

Rnd 6-Rnd 9(10): 1 hbdc in each st around, sl st to the first st to join, ch 1, turn. [42 hbdc]

Rnd 10(11): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [42 hbdc]

Do not finish off. Proceed to the Hat Band Sizes 12-24 months to Adult Large section below.

Child (6-10 years) Herringbone Half Double Hat

To fit 21″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 2 sts**. Work from * to ** around. Sl st to the first st to join, turn. [40 hbdc]

Rnd 5: *2 hbdc in the next st, 1 hbdc in each of the next 5 sts**. Work from * to ** 6 times. 1 hbdc in each rem st around, sl st to the first st to join, turn. [46 hbdc]

Rnd 6-Rnd 10(12): 1 hbdc in each st around, sl st to the first st to join, ch 1, turn. [46 hbdc]

Rnd 11(13): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [46 hbdc]

Do not finish off. Proceed to the Hat Band Sizes 12-24 months to Adult Large section below.

Adult Small (Teen) Herringbone Half Double Hat

To fit 22″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 2 sts**. Work from * to ** around. Sl st to the first st to join, turn. [40 hbdc]

Rnd 5: *2 hbdc in the next st, 1 hbdc in each of the next 4 sts**. Work from * to ** around. Sl st to the first st to join, turn. [48 hbdc]

Rnd 6-Rnd 11(14): 1 hbdc in each st around, sl st to the first st to join, ch 1, turn. [48 hbdc]

Rnd 12(15): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [48 hbdc]

Do not finish off. Proceed to the Hat Band Sizes 12-24 months to Adult Large section below.

Adult Medium Herringbone Half Double Hat

To fit 23″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 2 sts**. Work from * to ** around. Sl st to the first st to join, turn. [40 hbdc]

Rnd 5: *2 hbdc in the next st, 1 hbdc in each of the next 3 sts**. Work from * to ** around. Sl st to the first st to join, turn. [50 hbdc]

Rnd 6-Rnd 12(16): 1 hbdc in each st around, sl st to the first st to join, ch 1, turn. [50 hbdc]

Rnd 13(17): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [50 hbdc]

Do not finish off. Proceed to the Hat Band Sizes 12-24 months to Adult Large section below.

Adult Large Herringbone Half Double Hat

To fit 25″ head size.

Using your 6 mm (J) crochet hook, or size required for gauge:

• IMPORTANT: for every round of the hat you will work a ch 3 as the first stitch and count it as the first hbdc (this ch 3 replaces the first hbdc). For example: when it reads “2 hbdc in the next st” it means make a ch 3 and 1 hbdc in the next stitch

Rnd 1: RS: DMR: 10 hbdc, sl st to first st to join, turn. [10 hbdc]

Rnd 2: 2 hbdc in each st around, sl st to the first st to join, turn.  [20 hbdc]

Rnd 3: *2 hbdc in the next st, 1 hbdc in the next st**. Work from * to ** around, sl st to the first st to join, turn. [30 hbdc]

Rnd 4: *2 hbdc in the next st, 1 hbdc in each of the next 2 sts**. Work from * to ** around. Sl st to the first st to join, turn. [40 hbdc]

Rnd 5: *2 hbdc in the next st, 1 hbdc in each of the next 3 sts**. Work from * to ** around. Sl st to the first st to join, turn. [50 hbdc]

Rnd 6: *2 hbdc in the next st, 1 hbdc in each of the next 24 sts**. Work from * to ** around. Sl st to the first st to join, Turn. [52 hbdc]

Rnd 7-Rnd 13(18): 1 hbdc in each st around, sl st to the first st to join, ch 1, turn. [52 hbdc]

Rnd 14(19): 1 hbdc in each st around, sl st to the first st to join (see notes for turning instructions) [52 hbdc]

Do not finish off. Proceed to the Hat Band Sizes 12-24 months to Adult Large section below.

Refer to this video for assistance with adding the hat band: How to Add a Rolled Up Brim to a Top Down Hat

Hat Band Sizes Preemie to 6-12 months

• TURNING INSTRUCTIONS: If your hat finishes on an even numbered round, be sure to TURN your hat so the Right Side (RS) is facing before you begin the hat band.

Using your 5 mm (H) crochet hook, or size required for gauge:

R1: Ch 5, sk 1 ch, 1 sc in the BL of each ch across back to the hat, sk the st you started from, 1 sl st in each of the next 2 sts, ch 1, turn. [4 sc]

R2: Sk the 2 sl sts, work back across the hat band section making 1 sc in the BL of each of the next 3 sts, 1 sc in the last st, ch 1, turn. [4 sc]

R3: 1 sc in the BL of each st across, 1 sl st in each of the next 2 sts of the main hat, ch 1, turn. [4 sc]

R4: Sk the 2 sl sts, work back across the hat band section making 1 sc in the BL of each of the next 3 sts, 1 sc in the last st, ch 1, turn. [4 sc]

Rep R3 and R4 around until one stitch remains in the main hat.

Second Last Row: 1 sc in the BL of each st across, 1 sl st in the last st of the main hat, ch 1, turn. [4 sc]

Last Row: Sk the sl st, work back across the hat band section making 1 sc in the BL of each of the next 3 sts, 1 sc in the last st, ch 1, turn. [4 sc]

Joining Row: Bring the edges of R1 and the Last Row of the Hat Band together and line up the stitches. Work through both layers by working under the BL of the stitch from the Last Row and the remaining loops of the stitch from R1. 1 sl st in each st across. Finish off. [4 sl st]

Proceed to finishing instructions.

Hat Band Sizes 12-24 months to Adult Large

• TURNING INSTRUCTIONS: If your hat finishes on an even numbered round, be sure to TURN your hat so the Right Side (RS) is facing before you begin the hat band.

Using your 4.5 mm (7) crochet hook, or size required for gauge:

R1: Ch 11, sk 1 ch, 1 sc in the BL of each ch across back to the hat, sk the st you started from, 1 sl st in each of the next 2 sts, ch 1, turn. [10 sc]

R2: Sk the 2 sl sts, work back across the hat band section making 1 sc in the BL of each of the next 9 sts, 1 sc in the last st, ch 1, turn. [10 sc]

R3: 1 sc in the BL of each st across, 1 sl st in each of the next 2 sts of the main hat, ch 1, turn. [10 sc]

R4: Sk the 2 sl sts, work back across the hat band section making 1 sc in the BL of each of the next 9 sts, 1 sc in the last st, ch 1, turn. [10 sc]

Rep R3 and R4 around until one stitch remains in the main hat.

Second Last Row: 1 sc in the BL of each st across, 1 sl st in the last st of the main hat, ch 1, turn. [10 sc]

Last Row: Sk the sl st, work back across the hat band section making 1 sc in the BL of each of the next 9 sts, 1 sc in the last st, ch 1, turn. [10 sc]

Joining Row: Bring the edges of R1 and the Last Row of the Hat Band together and line up the stitches. Work through both layers by working under the BL of the stitch from the Last Row and the remaining loops of the stitch from R1. 1 sl st in each st across. Finish off. [10 sl st]

Proceed to finishing instructions.

Finishing Instructions

• Weave in any remaining ends.

Get the Herringbone Double Crochet Scarf Pattern here.

2023 Monthly Hat of the Month Club CAL

Get all the details about our 2023 CALs here:

Get all the details for the Scarf of the Month CAL here.
Get all the details for the Hat of the Month CAL here.
Check out the Supply List here.

Reminder Emails

If you would like to be notified when the new free scarf and hat patterns are published, you can sign up for our FREE monthly newsletter here:

Happy Crocheting 🙂

#hatofthemonth #freepatterns #crochet #CAL #crochetalong #2023CAL #crochethat #crochetgift #oombawkadesigncrochet #KingCole #KingColeYarn #KingColeCreations #KingColeAmbassador #freepattern #chunkyyarn #bulkyyarn

You may also enjoy these posts:

• Decembers Free Scarf Patterns
• 20 Free Cat Ear Beanie Patterns
• Festive Snowflake Coasters

Social Shares

Who said staying warm can’t be fashionable? 🧶 Create your own Herringbone Double Hat with just one ball of chunky yarn and watch the compliments roll in! With sizes from baby to adult large, it’s a perfect gift for anyone. For that finishing touch, we even have a matching scarf pattern. Get all wrapped up in style this winter. Check out my post for the free pattern or pop into my shop for an ad-free copy! 🧣

Add a dash of personal touch to your winter wardrobe! My crochet Herringbone Double Hat, made from a single ball of Chunky Weight Yarn [5], has got you covered. Available in sizes ranging from baby to adult large, there’s one for everyone. Don’t forget the matching scarf pattern for the perfect winter ensemble. Head over to my post for the free pattern or snag an ad-free copy from my shop!

Get crafty this season with an irresistible DIY project! My Herringbone Double Hat pattern is your ticket to a stylish winter accessory. Crafted with just one ball of Chunky Weight Yarn [5], this top-down crochet hat is available in a range of sizes, from baby to adult large. And that’s not all – we also have a matching scarf pattern to complete your winter look. Swing by my blog for the free pattern or shop for an ad-free version directly from my store.

Never miss a stitch with Oombawka Design Crochet! Subscribe for exclusive patterns, gift ideas, and tutorials delivered straight to your inbox. Follow me on Facebook, Pinterest, and Instagram for the latest updates!