Harry | Guest Contributor Post | Free Amigurumi Pattern
HARRY
MATERIALS AND EQUIPMENT:
– DK Weight Yarn
1) gray (250 m/100 g) – 35 g
2) light gray or off-white (250 m/100 g) – 15 g
3) yellow (250 m/100 g) – 5 g
4) white (250 m/100 g) – 5 g
5) black (250 m/100 g) – 50 cm (about 2 ft.)
– 2.5 mm crochet hook
– polyester fiberfill
– tapestry needle
– scissors
ABBREVIATIONS:
ch(-s). – chain(s)
sc – single crochet
Rnd(s) – round(s)
st(s). – stitch(es)
sl. st. – slip stitch
incr – increase (2 sc worked into 1 ch)
decr – decrease (2 sc crocheted together)
The pattern is written in US crochet terms.
DESCRIPTION:
All details are worked in spiral rounds without joining, unless otherwise stated.
The finished amigurumi is about 8,5” tall, if made with indicated yarn weight and hook size.
BODY:
(with gray)
1 Rnd: ch. 2, work 8 sc into the 2nd ch. from the hook = 8 sc,
2 Rnd: incr around = 16 sc,
3 Rnd: (incr, 3 sc) – repeat 4 times = 20 sc,
4 Rnd: 2 sc, (incr, 4 sc) – repeat 3 times, incr, 2 sc = 24 sc,
5 Rnd: 24 sc,
6 Rnd: 4 sc, (incr, 5 sc) – repeat 3 times, incr, 1 sc = 28 sc,
7 Rnd: 28 sc,
8 Rnd: (6 sc, 1 incr) – repeat 4 times = 32 sc,
9 – 12 Rnds: 32 sc,
13 Rnd: (incr, 7 sc) – repeat 4 times = 36 sc,
14 Rnd: 2 sc, (incr, 8 sc) – repeat 3 times, incr, 6 sc = 40 sc,
15 Rnd: 4 sc, (incr, 9 sc) – repeat 3 times, incr, 5 sc = 44 sc,
16 Rnd: 6 sc, (incr, 10 sc) – repeat 3 times, incr, 4 sc = 48 sc,
17 – 18 Rnds: 48 sc,
19 Rnd: (incr, 23 sc) – repeat 2 times = 50 sc,
20 – 31 Rnds: 50 sc,
32 Rnd: (decr, 3 sc) – repeat 10 times = 40 sc,
33 Rnd: 2 sc, (decr, 3 sc) – repeat 7 times, decr, 1 sc = 32 sc,
34 Rnd: (decr, 2 sc) – repeat 8 times = 24 sc, sl. st. into the next sc, do not finish off.
LEGS
(with gray)
1st leg:
1 Rnd: ch. 1, 7 sc, fold the body and work 1 sc into the same sc as the beginning ch.1 = 8 sc,
2 – 7 Rnds: 8 sc, sl. st. into the next sc, fasten off leaving a long end for sewing.
2nd leg:
Skip next 4 sc of the body,
1 Rnd: ch. 1, 7 sc, fold the body and work 1 sc into the same sc as the beginning ch.1 = 8 sc,
2 – 7 Rnds: 8 sc, sl. st. into the next sc, fasten off leaving a long end for sewing. Stuff the hare firmly (a pencil will help to stuff the legs), close the openings on the legs and the remaining 8 stitches of the body.
ARM (MAKE 2):
(with gray)
1 Rnd: ch. 2, work 8 sc into the 2nd ch. from the hook = 8 sc,
2 – 10 Rnds: 8 sc, sl. st. into the next sc, fasten off leaving a long end for sewing. Stuff lightly.
TOOTH (MAKE 2):
(with white)
Ch. 3, 1 sc into the 2nd ch. from the hook, ch. 1, sl. st. into the last ch., fasten off leaving a long end for sewing.
TAIL:
(with light gray or off-white)
1 Rnd: ch. 2, work 6 sc into the 2nd ch. from the hook = 6 sc,
2 Rnd: (incr, 1 sc) – repeat 3 times = 9 sc,
3 Rnd: 9 sc,
4 Rnd: (decr, 1 sc) – repeat 3 times = 6 sc,
- st. into the next sc, fasten off leaving a long end for sewing. Stuff lightly.
MUZZLE:
(with light gray or off-white)
1 Rnd: ch. 6, sc into the 2nd ch. from the hook and the next 3 ch-s, 3 sc into the last ch., 3 sc, 2 sc into the 1st ch. = 12 sc,
2 Rnd: incr, 3 sc, 3 incr, 3 sc, 2 incr = 18 sc,
3 – 5 Rnds: 18 sc, sl. st. into the next sc, fasten off leaving a long end for sewing. Sew down the teeth between Rnds 4 and 5 of the muzzle. Stuff lightly and attach between Rnds 11 and 16 of the body.
EYE PATCH (MAKE 2):
(with light gray or off-white)
1 Rnd: ch. 2, work 6 sc into the 2nd ch. from the hook = 6 sc, sl. st. into the next sc, fasten off leaving a long end for sewing. Attach the eye patches above the muzzle.
EAR (MAKE 2):
(with gray)
1 Rnd: ch. 2, work 4 sc into the 2nd ch. from the hook = 4 sc,
2 Rnd: incr around = 8 sc,
3 Rnd: 8 sc,
4 Rnd: (incr, 1 sc) – repeat 4 times = 12 sc,
5 – 6 Rnds: 12 sc,
7 Rnd: (decr, 4 sc) – repeat 2 times = 10 sc,
8 – 9 Rnds: 10 sc,
10 Rnd: (decr, 3 sc) – repeat 2 times = 8 sc,
11 – 12 Rnds: 8 sc,
13 Rnd: (decr, 2 sc) – repeat 2 times = 6 sc,
14 – 15 Rnds: 6 sc, sl. st. into the next sc, fasten off leaving a long end for sewing.
BOW TIE
(with yellow)
Detail 1:
1 Rnd: ch. 8, sc into the 2nd ch. from the hook and the next 5 ch-s, 3 sc into the last ch., 5 sc, 2 sc into the 1st ch. = 16 sc,
2 Rnd: incr, 1 sc, 3 sl. sts, 1 sc, 3 incr, 1 sc, 3 sl. sts, 1 sc, 2 incr = 22 sc, sl. st. into the next sc, fasten off, weave in the ends.
Detail 2 (knot):
1 Rnd: ch. 2, work 6 sc into the 2nd ch. from the hook = 6 sc, sl. st. into the next sc, fasten off leaving a long end for sewing.
JOINING:
- Attach the ears between Rnds 2 and 5 of the head.
- Attach the arms between Rnds 15 and 16 of the body.
- Stitch the hare with vertical stitches off-white (do not stitch the front of the ears). One stitch should be 1 or 2 sc tall. You can add a stitch to the muzzle to shape it, or skip this one.
- Sew the tail down between Rnds 25 and 27 of the body.
- Embroider the eyes with the French Knots ,
- and the nose and mouth with the Satin Stitch.
- Sew the knot of the tie to the main detail and sew the tie to Rnd 19 of the body.
Anastasiya Matyakh is the Owner and Designer at Born To Crochet, Forced To Work. For more adorable crochet designs please visit her at one of the following links:
On behalf of the Oombawka Design readers, and myself, I would like to Thank Anastasiya for sharing this adorable free amigurumi pattern for Harry! This is the 4th in her Woodland Series designed exclusively for Oombawka Design!
