Christina Beanie Crochet Pattern

When you purchase through links on my site, I may earn an affiliate commission.
Here’s how it works.

This is the Christina Beanie. The Christina Beanie is worked in rounds, from the top down, in one piece. This crochet hat pattern is available in sizes Preemie, to Adult. To make this project you will need Medium Weight Yarn [4] and a 5.5 mm (I) hook. The full written pattern is available in my post below, for free.

Christine Beanie Pattern #furlsinf821 #redheartyarns #yarnspirations #furlscrochet #crochethat #crochetbeanie

Supplies

Difficulty Level

Easy-Intermediate

Finished Size

This hat is designed between mid-ear and the base of the earlobe.

Preemie height 4.25 inches X 10 inches circumference

Newborn height 4.9 inches X 12 inches circumference

0-3 months height 5.4 inches X 14 inches circumference

3-6 months height 6 inches X 15 inches circumference

6-12 months height 6.6 inches X 16 inches circumference

12-24 months height 7.2 inches X 17 inches circumference

Small Child Hat (age 3-5 years) height 7.75 inches X 18 inches circumference

Child Hat (age 6-10 years) height 8.3 inches X 19 inches circumference

Teen Hat height 8.3 inches X 20 inches circumference

Adult Hat (Medium) height 9 inches X 21 inches circumference

Adult Hat (Large) height 9.5 inches X 22 inches circumference

Gauge

Approximately 13 sts per 4 inches and 7 rows worked in pattern per 4 inch 

You can substitute any yarn and hook for this stitch pattern – just remember when you substitute if your gauge is different, the finished size, and amount of yarn used for your project will also be different.

Abbreviations

US Terminology used

BL – back loop

ch – chain

ch1sp – chain one space

dc – double crochet

DMR – double magic ring

g – grams

m – meters

oz – ounces

rem – remaining

Rnd – round

RS – right side

sc – single crochet

special-Xdc – special crossed double crochet (see special stitches)

st/sts – stitch/stitches 

Xdc  – crossed double crochet (see special stitches)

yds – yards

* to **– Repeat the instructions between the asterisks the number of times indicated. This repeat will contain multiple instructions.

[] – at the end of the row – the total number of stitches

() – important notes AND sets of stitches to be worked within one stitch, or space

Special Stitches

Crossed Double Crochet (Xdc)

Sk the next 2 sts, 1 dc in the next st, ch 1, working in front of the last dc worked and not enclosing the previous double crochet within the stitch work 1 dc in the first st (of the 2 sts just skipped).

First Xdc of the Christina Beanie

Joining at the end of the first round of Xdc

Special-Xdc (special-Xdc)

To make the last Xdc of the round, we work over the following 3 sts:

Sk the next 2 sts, 1 dc in the next st (the dc left over from the Xdc from the previous round), ch 1, working in front of the last dc worked and not enclosing the previous double crochet within the stitch work 1 dc in the first st (the dc left over from the last Xdc where we already worked into the ch1sp) (of the 2 sts just skipped).

Helpful Tutorials

Stitch Anatomy

Quick Stitch Guide 

Slip Knot and Starting Chain

DMR

Invisible Join 

Notes:

  • Stitch multiple: 4 (Understanding Stitch Multiples)
  • Crochet stitch pattern : modified Crossbill Stitch
  • For my Sandra Hat Pattern which uses the Crossbill Stitch, please see this post
  • The initial ch-3 does not count as stitch unless specified.
  • The sl st does not count as a stitch
  • Make your sl st tightly
  • You may customize the hat height by working the repeat as many, or as few, times as you wish. Every 5 rounds you add with the stitch pattern, will add approximately 2-inches of height to the hat. 
  • If you would like to add a little bit more height to the hat, work an additional round (or two) of sc in the back loop only. 
  • I use an invisible join to finish off my final round of stitches, you may substitute a sl st to join if you prefer.
  • Add this project to your Ravelry Queue here
Christina Beanie Pattern

Christina Beanie Pattern Instructions

This hat is worked in joined rounds from the top-down. 

Preemie

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [32 dc]

Rnd 4: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [8 dc, 8 Xdc]

Rnd 5: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [8 dc, 7 Xdc, 1 special-Xdc]

Rnd 6: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Do NOT turn. [8 dc, 7 Xdc, 1 special-Xdc]

Rnd 7: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [32 sc]

Rnd 8: 1 sc in the BL of each st around. Finish off with an invisible join. [32 sc]

Proceed to finishing instructions.

Newborn

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 8 sts**. Work from * to ** around. Sl st to the first dc to join. [40 dc]

Rnd 5: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [10 dc, 10 Xdc]

Rnd 6: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [10 dc, 9 Xdc, 1 special-Xdc]

Rnd 7: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Do NOT turn. [10 dc, 9 Xdc, 1 special-Xdc]

Rnd 8: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [40 sc]

Rnd 9: 1 sc in the BL of each st around. Finish off with an invisible join. [40 sc]

Proceed to finishing instructions.

0-3 months baby

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [12 dc, 12 Xdc]

Rnd 6: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [12 dc, 11 Xdc, 1 special-Xdc]

Rnd 7-Rnd 8: Rep Rnd 6

Rnd 9: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [48 sc]

Rnd 10: 1 sc in the BL of each st around. Finish off with an invisible join. [48 sc]

Proceed to finishing instructions.

3-6 months baby

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [12 dc, 12 Xdc]

Rnd 6: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [12 dc, 11 Xdc, 1 special-Xdc]

Rnd 7-Rnd 8: Rep Rnd 6

Rnd 9: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Do NOT turn. [12 dc, 11 Xdc, 1 special-Xdc]

Rnd 10: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [48 sc]

Rnd 11: 1 sc in the BL of each st around. Finish off with an invisible join. [48 sc]

Proceed to finishing instructions.

6-12 months baby

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 11 sts**. Work from * to ** around. Sl st to the top of the first dc to join. [52 dc]

Rnd 6: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [13 dc, 13 Xdc]

Rnd 7: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [13 dc, 12 Xdc, 1 special-Xdc]

Rnd 8-Rnd 9: Rep Rnd 6

Rnd 10: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Do NOT turn. [13 dc, 12 Xdc, 1 special-Xdc]

Rnd 11: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [52 sc]

Rnd 12: 1 sc in the BL of each st around. Finish off with an invisible join. [52 sc]

Proceed to finishing instructions.

12-24 months baby

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 5 sts**. Work from * to ** around. Sl st to the first dc to join. [56 dc]

Rnd 6: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [14 dc, 14 Xdc]

Rnd 7: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [14 dc, 13 Xdc, 1 special-Xdc]

Rnd 8-Rnd 11: Rep Rnd 7

Rnd 12: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [56 sc]

Rnd 13: 1 sc in the BL of each st around. Finish off with an invisible join. [56 sc]

Proceed to finishing instructions.

Small Child Hat (Age 3-5 years)

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 3 sts**. Work from * to ** around. Sl st to the top of the first dc to join. [60 dc]

Rnd 6: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [15 dc, 15 Xdc]

Rnd 7: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [15 dc, 14 Xdc, 1 special-Xdc]

Rnd 8-Rnd 11: Rep Rnd 7

Rnd 12: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [60 sc]

Rnd 13: 1 sc in the BL of each st around. Finish off with an invisible join. [60 sc]

Proceed to finishing instructions.

Child Hat (Age 6-10 years)

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 3 sts**. Work from * to ** around. Sl st to the top of the first dc to join. [60 dc]

Rnd 6: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 14 sts**. Work from * to ** around. Sl st to the top of the first dc to join. [64 dc]

Rnd 7: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [16 dc, 16 Xdc]

Rnd 8: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [16 dc, 15 Xdc, 1 special-Xdc]

Rnd 9-Rnd 12: Rep Rnd 8

Rnd 13: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Do NOT turn. [16 dc, 15 Xdc, 1 special-Xdc]

Rnd 14: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [64 sc]

Rnd 15: 1 sc in the BL of each st around. Finish off with an invisible join. [64 sc]

Proceed to finishing instructions.

Teen Hat

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 3 sts**. Work from * to ** around. Sl st to the top of the first dc to join. [60 dc]

Rnd 6: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 6 sts**. Work from * to ** 8 times. 1 dc in each rem st around. Sl st to the top of the first dc to join. [68 dc]

Rnd 7: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [17 dc, 17 Xdc]

Rnd 8: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [17 dc, 16 Xdc, 1 special-Xdc]

Rnd 9-Rnd 12: Rep Rnd 8

Rnd 13: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Do NOT turn. [16 dc, 15 Xdc, 1 special-Xdc]

Rnd 14: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [64 sc]

Rnd 15: 1 sc in the BL of each st around. Finish off with an invisible join. [64 sc]

Proceed to finishing instructions.

Adult Hat (Medium)

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 3 sts**. Work from * to ** around. Sl st to the top of the first dc to join. [60 dc]

Rnd 6: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 6 sts**. Work from * to ** 8 times. 1 dc in each rem st around. Sl st to the top of the first dc to join. [68 dc]

Rnd 7: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [17 dc, 17 Xdc]

Rnd 8: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [17 dc, 16 Xdc, 1 special-Xdc]

Rnd 9-Rnd 14: Rep Rnd 8

Rnd 15: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [64 sc]

Rnd 16: 1 sc in the BL of each st around. Finish off with an invisible join. [64 sc]

Proceed to finishing instructions.

Adult Hat (Large)

Using your 5.5 mm (I) hook (or size required for gauge):

Rnd 1: DMR: Ch 3 (does not count as a stitch), 12 dc, sl st to the first dc to join. [12 dc]

Rnd 2: Ch 3 (does not count as a stitch), 2 dc in each st around. Sl st to the first dc to join. [24 dc]

Rnd 3: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in the next st**. Work from * to ** around. Sl st to the first dc to join. [36 dc]

Rnd 4: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 2 sts**. Work from * to ** around. Sl st to the first dc to join. [48 dc]

Rnd 5: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 3 sts**. Work from * to ** around. Sl st to the top of the first dc to join. [60 dc]

Rnd 6: Ch 3 (does not count as a stitch). *2 dc in the next st, 1 dc in each of the next 4 sts**. Work from * to ** around. Sl st to the top of the first dc to join. [72 dc]

Rnd 7: (RS) Ch 3 (counts as 1 dc). Starting in the next st, *Xdc (see special stitches), 1 dc in the next st**. Work from * to ** around to the last 3 sts. Work Xdc. Sl st to the top of the initial ch 3 to join. Turn. [18 dc, 18 Xdc]

Rnd 8: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [18 dc, 17 Xdc, 1 special-Xdc]

Rnd 9-Rnd 14: Rep Rnd 8

Rnd 15: Ch 3 (does not count as 1 dc). *1 dc in the ch1sp of the first Xdc, Xdc (using the next 3 dc)**. Work from * to ** around to the last Xdc. Work 1 dc in the ch1sp of the last Xdc and a special-Xdc (see special stitches). Turn. [18 dc, 17 Xdc, 1 special-Xdc]

Rnd 16: 1 sc in each st and ch1sp around. Sl st to join. Do not turn. [70 sc]

Rnd 17: 1 sc in the BL of each st around. Finish off with an invisible join. [70 sc]

Proceed to finishing instructions.

Finishing Instructions:

Weave in any remaining ends securely.

Did you remember to make your Ravelry Project Page? (How to Make a Ravelry Project Page.)

Christina Beanie on Ravelry

Christine Beanie Pattern #furlsinf821 #redheartyarns #yarnspirations #furlscrochet #crochethat #crochetbeanie

Crochet Hat Patterns

Oombawka Design Crochet Free Patterns

Signature

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.