Welcome! As part of the 12 Weeks of Christmas CAL I have designed a new crochet Angel pattern for you to make. This is an easy and quick project. Grace is perfect for gift giving too!
This Angel Crochet Pattern is available for free in my post below.
Scroll down to get a PDF copy of Grace from my pattern shop for FREE – October 4th to 5th only!
You can scroll to the end of the post for the pattern OR read on to find out how you can get more patterns, for free during our Blog Hop! AND where you can go to enter our Giveaway!
Get all the details right >HERE<
Grace features a brand-new wing design! If you prefer one of the other wing designs you can access the patterns here:
This Angel is crocheted with medium weight yarn and a 4 mm (G) hook. Like my other crochet Angels, she does not require stiffening to stand and can be crocheted in only a few short hours.
Grace has a streamlined and simple skirt with a ruffled hem.
This skirt design is like a blank canvas. You can easily add embroidered stitches or cross stitches to her skirt if you would like to add some color or personal touches.
For the next 36 hours you can get a PDF copy of Grace from my Ravelry Shop, for free
with Coupon Code:
Click here to have the pattern added to your cart and the coupon code automatically entered. Then, click “use this coupon” to proceed!
Double check your total is showing free $0.00 owing and click “checkout now“.
Refunds will not be given for improperly applied or forgotten coupons.
If you have trouble making the coupon code work please contact me before you pay so I can help!
Grace Angel Crochet Pattern
Create your project page on Ravelry for Grace here
- Yarn: Red Heart Super Saver – (7 oz/198 g; 364 yds/333 m), 100% acrylic. Medium  Weight.
Color: White. My finished angel used 0.95 oz / 27 g (50 yards / 46 m)
- Hook: 4.0 mm (G)
- Scissors, Yarn Needle, Stitch Marker (is recommended – safety pins work/paper clips too/hoop earrings)
- HALO: Bowdabra Bow Wire – Color Gold and 2.25 mm (B) crochet hook
6 inches tall (not including the halo), 5.25 inches wide when standing and measuring the diameter of the skirt
Not imperative but if your stitches have spaces between them that you can see through you need to go down a hook size (or two) until you are crocheting a more solid fabric.
You can substitute any yarn and hook for this stitch pattern – just remember when you substitute if your gauge is different, the finished size, and amount of yarn used for your project will also be different.
US Terminology used
beg – beginning
bl – back loop
BPsc – back post single crochet
ch – chain
ch2sp – chain 2 space
dc – double crochet
DMR – double magic ring
dtr – double treble
FPsc – Front Post single crochet
hdc – half double crochet
R – round
rem – remaining
rep – repeat
sc – single crochet
sc2tog – single crochet 2 together
sk – skip
sl st – slip stitch
st/sts – stitch/stitches
tr – treble
* to **– Repeat the instructions between the asterisks the number of times indicated. This repeat will contain of multiple instructions.
 – at the end of the row – the total number of stitches
() – important notes AND sets of stitches to be worked within one stitch, or space
Single Crochet Two Together – I recommend you only go under the front loop while doing the sc2tog for this project
Helpful Video Tutorials
I demonstrated how to make one of my other Crochet Angel Patterns (Patience) in a full length YouTube Video Pattern Tutorial. You can view the video tutorial for the arms, wings pattern 2 and halo here:
- This project is worked in continuous rounds. You will need to use a stitch marker so you do not lose your place.
- Do not slip stitch to join at the end of rounds unless specified.
- When you work the sc2tog decreases work under the front loop only (it makes the stitch less thick).
- The arm, wings and halo are worked in rows.
- Stitch the hands together to make your angel ‘pray’ or give her something to hold in her hands.
- Add hair to her head if you’d like!
- Stitch a bell under her skirt, or add a ribbon to her back (above her wings) to make her an ornament for your tree.
- Add a handmade paper (or plastic) cone under her skirt to help her stay in shape on the top of your Christmas Tree.
Grace Angel Crochet Pattern Instructions
You are beginning at the top of the Angel’s head and working in continuous rounds to the base of the dress, all in one piece.
Using your 4 mm (G) hook (or size required for gauge):
R1: Work 6 sc in a DMR. [6 sc]
R2: 2 sc in each sc around. [12 sc]
R3: *2 sc in the next st, 1 sc in the next st**. Rep from * to ** around. [18 sc]
R4-R6: 1 sc in each st around. [18 sc]
R7: *Sc2tog over the next 2 sts, 1 sc in the next st**. Rep from * to ** around. [12 sc]
I recommend you firmly stuff the head at this point.
R8: Sc2tog around. [6 sc]
R9: 1 FPsc in each st around. [6 FPsc]
R10: 1 sc and 1 FPsc in each st around. [6 sc, 6 FPsc]
R11: 1 sc in the first st, 2 sc in the next st, 1 sc in each of the next 5 sts, 2 sc in the next st, 1 sc in each of the next 4 sts. [14 sc]
R12: 1 sc in the first st, ch 3, sk 2 sts, 1 sc in each of the next 5 sts, ch 3, sk 2 sts, 1 sc in each of the next 4 sts. [10 sc, 2 ch3sp]
R13: 1 sc in the first st, 1 sc in the bl of each of the next 3 chs, 1 sc in each of the next 5 sts, 1 sc in the bl of each of the next 3 chs, 1 sc in each of the next 4 sts [16 sc]
R14-R16: 1 sc in each st around. [16 sc]
R17: 1 sc in the back loop of each st around. [16 sc]
R18: *2 sc in the next st, 1 sc in each of the next 3 sts**. Rep from * to ** around. [20 sc]
R19: 1 sc in each st around. [20 sc]
R20: *2 sc in the next st, 1 sc in each of the next 4 sts**. Rep from * to ** around. [24 sc]
R21: 1 sc in each st around. [24 sc]
R22: *2 sc in the next st, 1 sc in each of the next 5 sts**. Rep from * to ** around. [28 sc]
R23: 1 sc in each st around. [28 sc]
R24: *2 sc in the next st, 1 sc in each of the next 6 sts**. Rep from * to ** around. [32 sc]
R25: 1 sc in each st around. [32 sc]
R26: *2 sc in the next st, 1 sc in each of the next 7 sts**. Rep from * to ** around. [36 sc]
R27: 1 sc in each st around. [36 sc]
R28: *2 sc in the next st, 1 sc in each of the next 8 sts**. Rep from * to ** around. [40 sc]
R29: 1 sc in each st around. [40 sc]
R30: 1 hdc in the back loop of each st around. [40 hdc]
R31: 1 BPsc in each st around. Finish off. [40 BPsc]
R32: Rejoin your yarn in any rem front loop from R29 with a sl st. Ch 3 (counts as 1 dc) and 2 more dc in the same front loop. 3 dc in each rem front loop around. Finish off. [120 dc]
The arm is created in one piece; worked flat and then seamed on the long edges with a slip stitch seam. Once the arm is complete you thread it through the openings on either side of the angel’s body, being sure to keep an equal amount of “arm” on each side. You can whipstitch these in place if you wish – I did not. I simply used 2 small stitches to attach the hands together in a “prayer” pose.
R1: Ch 21, beg in 2nd ch from hook and work 1 sc in each across, ch 1, turn 
R2: 1 sc in each st across, ch 1, turn 
R3: Rep R2, ch 1, turn 
Fold the rectangle in half (along row 2) and seam the long edges using a slip stitch seam. Finish off and weave in any remaining ends.
R1: Work ch 3 (counts as 1 dc), 2 dc, ch 2, 2 dc in a DMR. Turn. [5 dc, ch2sp]
R2: Ch 4 (counts as 1 tr) and 2 tr in the first st, 2 dc in the next st, 3 hdc in the ch2sp, 1 hdc in the next st, 1 sl st in each of the next 2 sts. Ch 1, turn. [3 tr, 2 dc, 4 hdc, 2 sl st]
R3: Sk the first sl st, 1 sc in each of the next 5 sts, 1 hdc in the next st, 1 dc in the next st, (2 tr and 1 dtr) in the next st, sk the last st (the ch 4 at the beg of R2). Ch 1, turn. [1 dtr, 1 tr, 1 dc, 1 hdc, 5 sc]
R4: 1 sl st in each st and around the row edge back to the DMR. Finish off. [15 sl st]
To attach the wings use a whip stitch and here is an image for placement:
The halo is the only part of this project to use a different hook and thread. Please use the 2.25 mm (B) hook and the Gold Bowdabra Bow Wire. This is a thin piece of wire wrapped in gold metallic thread. I found mine at Michael’s in the ribbon section. It can stand on it’s own which is why I like it – and it is much thinner than pipe-cleaner (which was what I had been considering).
I crocheted the halo like this:
Ch 20, finish off leaving a tail of the bow wire. Now take the tail and thread it through the 7th chain from the opposite end. This will create the halo loop. Now twist (like a twist-tie) the two remaining ends together to make it straight and stiff. Take that one end (since you twisted them together you have one wire now) and thread it through the back of the angel’s head and down to the base of the neck before cutting off any of the excess wire. If you want to dab a bit of fabric glue in there to keep it in place you can.
The image below is for my Crochet Angels Pattern but the Halo design is the same: